There are two methods to configure MaxProxy proxy IP, also known as MaxProxy proxy settings, in the Bit Fingerprint Browser:
The first method is similar to the 911s5 proxy. It is achieved through proxy IP + port forwarding mode. Those who have used the 911s5 proxy will find the configuration easy to understand. The second method is to directly obtain IP information in the MaxProxy proxy software and copy it directly into the proxy settings of each Bit Fingerprint Browser. If you want to open 10 Bit Fingerprint Browser windows simultaneously, you need to configure 10 ports with 10 IP addresses in the MaxProxy proxy software. The configuration methods for MaxProxy dynamic IP and static IP are the same, and both have the above two configuration modes (port forwarding and IP retrieval).
I. Creating a new Bit Browser: On the homepage of the Bit Fingerprint Browser software, click on “New Browser.”
II. Generating Proxy IP as Needed in MaxProxy:
[Obtaining IP in MaxProxy Software’s Dynamic IP or Static IP]
Select the “Dynamic IP” or “Static IP” tab based on your needs. Click on the “Get IP” button. Choose the desired country/region and city. Select the number of proxy IPs you need to purchase. Let’s take the example of purchasing 1 IP. Click on the “Place Order” button to complete the purchase of the proxy IP.
[Proxy IP + Port Forwarding Mode]
Click on the “Port Forwarding” icon in the proxy IP list.
Select a port and assign the proxy IP to that port.
Click the “OK” button.
You can see which proxy IP is assigned to a port in the Proxy tab.
[Direct IP Information Retrieval Mode]
In the “Action” field of the proxy IP list, click on the “Copy” icon.
Click the “Copy” button to copy a proxy IP (Here, you can choose the arrangement of IP information and select the HTTP or SOCKS5 protocol as needed).
Click the “Close” button to close the IP detailed information interface.
III. Configuring MaxProxy Proxy IP in the Bit Fingerprint Browser: [Proxy IP + Port Forwarding Mode]
Create a new browser – Proxy settings (For an existing browser: Click on the three dots next to the “Open” button – Modify – Proxy settings).
Proxy Type: Choose SOCKS5, based on the proxy type selected during IP extraction in MaxProxy.
Proxy Host: Enter 127.0.0.1 (If MaxProxy proxy software and Bit Fingerprint Browser are on the same computer. Otherwise, enter the local LAN IP address of your computer. You can find the LAN IP address in the “Local Proxy” section of the MaxProxy proxy software interface. The LAN IP address in this tutorial is 192.168.186.234).
Proxy Port: Enter the corresponding port number (For this tutorial, let’s use 6000 as an example).
Proxy Username: Leave it empty.
Proxy Password: Leave it empty. Click on “Check Proxy” to verify if the network configuration of the proxy IP is successfully connected.
If specific IP information is displayed, it indicates a successful connection. Otherwise, it indicates a failed connection.
Finally, click “OK” to complete the configuration successfully.
[Direct IP Information Retrieval Mode]
Create a new browser – Proxy settings (For an existing browser: Click on the three dots next to the “Open” button – Modify – Proxy settings).
Proxy Type: Choose SOCKS, depending on the proxy type selected during IP extraction in MaxProxy.
Proxy Host, Proxy Port, Proxy Username, Proxy Password: Copy the IP information from MaxProxy proxy.
Paste the proxy information into the Proxy Host input field in the Bit Fingerprint Browser.
Click on “Check Proxy” to verify if the network configuration of the proxy IP is successfully connected.
If specific IP information is displayed, it indicates a successful connection. Otherwise, it indicates a failed connection. Finally, remember to click “OK” to apply the configuration.
IV. Configuring Additional MaxProxy Proxy Ports:
If the number of port forwarding is insufficient, you can enter a larger range of port numbers in the port forwarding section of the system settings in the MaxProxy proxy software.
